FREE Rotary Engraving Machine Cutters
Scott Machine micrograin carbide cutters are American made, by craftspeople who take pride in their work, so you can engrave confidently and competently. These cutters produce clean, sharp letters and are ultra-durable for long-term use. They feature versatile Scott Omni-Grind™ geometry, designed to eliminate “cutter clutter” by providing fully adaptable blade performance across the entire line of our engraving plastics.
For proper sizing, choose a cutter (or "bit") width based on the height of your engraved letter. An 1/8" inch letter would use one of the two smallest bits. For lettering about 1/4" tall, a 0.030" bit is the place to start. Expand your cutter width as you increase your letter height; when you reach a 1" letter height, choose our 0.125" bit.
FREE Cutters: Receive any solid carbide 4½" x 1/8" cutter for free when you purchase at least $50 worth of custom-cut pieces of
Carbide Engraving Bits for Plastics - 4½" x 1/8"
Click the magnifying for more details about each item.
Engraving Bits For Metals
Use Scott-Kool lubricant with the 11/64" bits for extended life and smooth lettering.
Scribe soft metals: diamond tip, no lubricant, 4½" x 1/8"
For alum & brass: quarter-round, 6½" x 11/64"
For stainless steel: quarter-round, coated, 4½" x 11/64"
Get the Cutting Edge with Solid Carbide
These micrograin carbide cutter blanks are 1/8", 11/64" and 1/4" diameters. We only use solid carbide, the most stable cutter material, enabling the shank to remain blemish- and rust-free. For instance, they are never marred by the set-screw holding the knob.
Carbide rods never bend, so re-sharpening them always results in a "like new" cutting edge, true to size and form. And because carbide dissipates heat very rapidly, it can hold consistently tight tolerances from tool to tool in the manufacturing process.
Scott Omni-Grind™ Reduces Cutter Clutter
The exacting Omni-Grind™ geometry of our precision cutters affords engraving that produces clean-edged, swirl-free letters in all engraving plastics, on a wide range of engraving machines and speeds – with a single blade. This eliminates the need for multiple cutters that overcomplicate the cutting process.
Our engraving cutters are accurately sharpened with the perfect relief angle. The cutter tips are ground according to the material being engraved. So a cutter being used for plastic has a greater clearance behind the cutting edge than one being used for steel. As the material becomes harder, the angle decreases, giving the cutting edge more strength.
To receive your FREE 4½" x 1/8" cutter, crafted right in our upstate New York factory, call or write and our customer service staff will gladly take your order for engraving plastic and add in your free cutter.
Roland part number with Scott® equivalent
Roland part C2-125-010K = Scott CAR0
Roland part C2-125-015K = Scott CAR1
Roland part C2-125-030K = Scott CAR2
Roland part C2-125-060K = Scott CAR4
Roland part C2-125-090K = Scott CAR6
Roland part C2-125-125K = Scott CAR8
These 4½" long x 1/8" diameter cutters fit all Scott AutoGravers and Roland 2300, EGX-20, EGX-30, EGX-30A and EGX-350 engravers. They're the perfect fit for the perfect cut!
These 11/64" diameter cutters fit all top-loading Roland EGX-350, 400/600 & DE-3 machines.